Scan-to-CAD | An Essential Part of Product Development
CAD software are key elements for companies’ Product Lifecycle Management to shorten time to market, get better product quality, and lower cost. Without them, product development would be a lot harder and processes longer. 3D scanning gives you the opportunity to generate an accurate CAD model files of physical objects in a quick and easy way. Portable 3D scanners are now a must-have since it prevents engineers to have to go old school to obtain competitors or even their own products’ CAD files. They can start from that scanned file and use different software to develop and test new products.
To go from 3D scans to CAD, designers can choose between three workflows: CAD software, Complete Reverse Engineering (RE) Software, and Scan to CAD Software. Each of which offers both pros and cons as listed hereunder. The best option will depend on the designer’s specific needs, frequency of use, and allocated budget.
This workflow takes place entirely in CAD software, where the .stl CAD file is imported and the mesh is cleaned out and aligned. Once the scan is clean and aligned, measurements and features are extracted. Feature modeling can now begin to obtain the final CAD model.PROSThe history tree is saved in CAD software. If a feature is modified (e.g., increase or decrease of a hole dimensions), then all related features will be updated without having to redo anything.CONSCompared to other software, CAD software is limited to mesh edition—cleaning mesh, removing noise, and filling holes—as well as with the alignment. Some CAD software does not even enable designers to edit the mesh and only enables to use it as a visual reference.
Complete Reverse Engineering Software
This workflow starts in Reverse Engineering (RE) software, where the mesh is created, edited, and aligned. Once the scan is clean and aligned with the desired coordinate system, dimensional properties are extracted. CAD operations—feature modeling—are performed in RE software before transferring the solid model to CAD software and obtaining the final CAD model.PROSRE software offers high-performance functionalities for mesh editing and alignment. The history tree can be transferred from complete RE software to CAD software.CONS
However, CAD and RE software might have compatibility problems, and the history tree transfer might not be as smooth as expected.
It is more expensive than other software.
Designers, often very skilled and knowledgeable with CAD software, must learn how to use new software with different features.
Scan to CAD Bridge Software
After the mesh has been generated, aligned, and optimized, dimensional properties are extracted through geometrical entities, cross-sections, and surface patches (for free-form shapes). Then, these entities can be transferred to CAD software and used as reference data on which feature modeling will be based. A last step of validation—comparing the resulting CAD model to the mesh—completes this workflow and results in the final CAD model.PROSThis bridge option is less expensive than complete RE software, and it is simple and easy to use. The scan to CAD bridge software enables CAD designers to get to CAD software more quickly.CONSIt sometimes involves hopping between applications when additional features are needed.