Find the message you see in the SketchUp Importer for Revit or match the issue in your imported model. If the fix does not work, check the import log before contacting Trimble Support.
Errors before import
Message | What to do |
|---|---|
Could not generate a preview for this model. | Save the file again in SketchUp, then retry the import. |
Could not convert the SketchUp file. Check the log for details. | Check the log for the conversion error. |
Could not save the converted file. Check available disk space and permissions. | Free up disk space and check that you have write permission for the |
Invalid or unsupported TrimBIM file. | Save the file again in SketchUp. |
Viewer viewport could not be created. | Update your graphics driver, then restart Revit. |
Preview failed: | Send the log to Trimble Support. |
Please check at least 1 object from the list to import | Tick the box next to at least one object in the list. |
Import failure messages
Reason Shown | Cause | What to do |
|---|---|---|
Revit could not modify the document (it was read-only or temporarily disabled during import)... | The project is read-only or Revit is in edit mode. | 1. Finish any active edit. |
An imported element name conflicts with existing content in the document. | The project already has a family or type with that name. | 1. Rename the component in SketchUp. |
Revit rejected part of the geometry during import. Check the log for details. | Revit could not use some of the SketchUp geometry. | 1. Open the log. |
The file appears to be invalid or corrupted and could not be read. | The | 1. Save the |
Template files are missing... | The installation is missing family templates. | Run the installer again. |
The import took too long and was stopped. | The import timed out. | Import fewer objects at a time or use Mesh for detailed context geometry. |
The file could not be found. | The file has moved or been deleted. | Select the file again. |
The SketchUp conversion components are missing... | The importer could not load the converter files. | Run the installer again. |
The geometry of these objects could not be built: 'A', 'B'... and N more. | The importer could not build the geometry. The message names up to five objects. | 1. Find the named objects in SketchUp. |
The category of these objects could not be assigned: ... | Revit rejected the category for those objects. | Choose another category in Select Objects. |
Import notices
Notice | Cause | What to do |
|---|---|---|
Some geometry was simplified due to boundary issues in the SketchUp model. | The importer removed faces that were not flat, intersected themselves or were too small. It also filled holes. | Repair the affected geometry in SketchUp, then import it again. |
roof object(s) could not be built as editable Revit roofs and were imported as meshes in the Roofs category. | The roof failed a shape check. | Simplify the roof to one closed slab of even thickness. Remove duplicate faces and make sure the faces have a consistent orientation. See the Modeling Playbook. |
curtain wall(s) could not be built as native Revit curtain walls and were imported as generic objects instead. | The parts do not form a regular grid or Revit rejected the curtain wall. | Use a regular grid. Alternatively, model the wall with surfaces and thin solids. See the Modeling Playbook. |
object(s) were imported as Generic Models because Revit does not allow for families. | The system category you chose does not accept families. | Choose another category or change the import option to Native or Mesh. |
Model issues after import
What you see | Likely cause | What to do |
|---|---|---|
A window or door has no opening in the wall. | Revit could not host the window or door. It may not overlap the wall, the wall may not be native, the import may use Mesh, or the wall may be curved. | Position the window or door so it overlaps the wall by at least 10 mm. Keep the wall set to Native. |
A wall imports as a generic family. | The wall is not a closed solid. | Check Volume and repair the solid in SketchUp. |
A floor is missing or empty. | The floor has no horizontal face or has too many faces. | If the floor has no horizontal face, add a flat top face. If it has too many faces, increase Max faces per floor. |
All objects sit on one Level. | Import level is set to a single Level. | Create the Levels in Revit first. Then choose By elevation. |
A mesh has no Level. | Revit cannot assign a Level to a mesh imported with Mesh. | Choose Native, Solid Family or Mesh Family instead. |
A material looks wrong. | The Revit project already has a material with the same name. | Rename the material in SketchUp or use Map Materials. Material mapping does not apply to meshes. |
A finish is on the wrong side. | The faces point the wrong way. | Reverse the affected faces in SketchUp. |
The import creates many small families. | The SketchUp model contains many separate groups. | Turn repeated groups into components in SketchUp. |
Nothing changes on a second import. | The importer skips elements from the earlier import. | Save a backup of the Revit project before deleting the old elements. Delete those elements before you import again. |
A window sill height is wrong. | The window has no Sill Height property. | Add the Sill Height property. Enter the height as a number in millimetres. |
Guides, text or an image are missing. | The importer skips guides, text and images. | The importer skips these items without a warning. Redraw them in Revit. |
An unexpected Generic Model appears. | The importer picked up a SketchUp dimension or loose geometry. | Save a copy of the SketchUp file before deleting anything. Delete dimensions and loose geometry from the copy before importing it. |
Check the import logs
The SketchUp Importer for Revit logs every import attempt, even if it fails or stops before it finishes. Check the log to see what went wrong.
In the extension, select Info > Log folder. You can also find the .log files at these locations:
File | Location |
|---|---|
Current log |
|
Older logs |
|
Check RevitExporter.log for the ten most recent events. Look for older events in the dated log files in the same folder.
Use these prefixes to find the entries you need:
Prefix | What it tells you |
|---|---|
| One line summarises the outcome, elements, failures, duration, fallbacks and holes. |
| The settings used for the import. |
| A count by type of the Revit warnings marked Hidden. |
| Whether doors and windows were hosted, imported as freeform geometry, skipped or lost. |
| One line per door or window identifies the host wall or explains why Revit did not host the object. |
| Where the importer got the window's sill height. |
| Wall import events and fallbacks. |
| Curved wall import results. |
| Floor import events. |
| Curtain wall import results. |
| Roof import results and why Revit rejected any roofs. |
| Problems assigning objects to Levels. |
| How the importer handled textures. |
Check these folders for settings, textures and temporary downloads:
Item | Location |
|---|---|
Import and panel settings |
|
Texture store |
|
Temporary downloads |
|
Contact Trimble Support
In the extension, select Info > Contact support or open the Trimble Support contact form. Include the following with your request:
- Attach your latest log files.
- Attach the file you are trying to import.
- State which versions of Revit and SketchUp you use.
- Describe the issue in detail.