Use the Trimble SketchUp for Revit extension settings to control where the importer places your SketchUp model and how it builds the model in Revit. The settings apply to every file you import.
To open the settings:
- Open a Revit project.
- Check that you are signed in with your Trimble ID.
- On the SketchUp ribbon, click Manage > Settings.
When you save your settings, the extension stores them on your device. To copy or share them, look for panel-settings.json in the Trimble SketchUp for Revit files on your device.
Model settings
Import Level
Import Level controls which Level imported elements attach to in Revit. Choose a specific Level or select By elevation. If you select By elevation, the importer attaches each element to the highest Level at or below its lowest point. For floors, the importer uses the top surface. For ceilings and roofs, it uses the underside. The importer only considers Levels with Building Story selected. If your project has no Levels, close the settings, add a Level in Revit, then reopen the settings.
Level Tolerance
Level Tolerance sets how far below a Level an element can start and still attach to that Level. This setting only appears when you select By elevation.
Curtain Wall
The importer uses the Curtain Wall type you select for every native Curtain Wall it creates. You can choose any Curtain Wall type loaded in the Revit project. If you leave the setting unchanged without selecting a type, the importer uses the first Curtain Wall type in the project. The importer needs at least one Curtain Wall type to work.
Limits
Max Shapes Per Family
Max Shapes Per Family sets how many solid shapes a family can contain during import. If a family exceeds the limit, the importer splits it into parts. Mesh parts do not count towards the limit. Use a lower value for very detailed components.
Texture Storage Limit
The importer stores each texture once. If it exceeds the storage limit, it removes the least used textures. If your project uses a removed texture, it stops displaying that texture until you import the model again.
Walls
Separate Layers for Walls
Turn on Separate Layers for Walls to import each material region as a separate wall with a single layer. The importer creates a Finish wall from a single face and a Structure wall from a solid. If you turn this setting off, the importer uses the largest solid as the wall.
Default Thickness
The importer uses Default Thickness for walls drawn as a single face and for walls with a missing or invalid thickness.