Use the Rotate tool (
) in SketchUp for iPad to rotate selected geometry. When you activate it, the cursor becomes a protractor. You can set geometry at a specific angle, rotate your whole model around a fixed point or create an array of copies.
The Rotate tool in SketchUp for iPad has these optional modes:
- Copy (
) creates a copy to rotate and leaves the original geometry in place. - Inference Locks restrict rotation to a specific inference point:
- Lock X (
) locks rotation to the X axis or Red plane. - Lock Y (
) locks rotation to the Y axis or Green plane. - Lock Z (
) locks rotation to the Z axis or Blue plane. - Lock Parallel (
) locks rotation parallel to a selection or the last line drawn.
- Lock X (
iPad input methods for the Rotate tool
With the Pencil, you can use the Rotate tool in Just Draw or Click-Move-Click mode. All other input methods use Click-Move-Click mode only.
Pencil. Activate the Rotate tool and any optional modes you need. Follow the instructions for your input mode:
- Just Draw. Tap the Pencil where you want to centre the rotation. Tap again and draw around your selection to rotate it.
- Click-Move-Click. Long press where you want to centre the rotation, then release. Move to the starting point and long press again. Rotate the geometry to the angle you want, then long press again to finish.
For all other input methods, activate the Rotate tool and any optional modes you need. Click or long press where you want to centre the rotation. Move to your starting point and click or long press again. Rotate the geometry to the angle you want.