Use the SketchUp Importer for Revit to import local SketchUp (.skp) or TrimBIM (.trb) files, files saved in Trimble Connect, or models from 3D Warehouse.
After you install the extension, the SketchUp ribbon appears in Revit. Use the importer panel to import files and inspect or edit imported elements. The panel has three trays:
- Entity Info shows details for the selected imported element and lets you change common properties. Use the tray tools to make other changes to elements in your project.
- Outliner shows your project elements in a searchable tree. Use it to show or hide imported elements and organise elements by Source (imported SketchUp elements or original Revit elements), Revit level, category or phase.
- Materials lists the materials used by imported elements. See Exporting Materials to Revit.
Import options
Import a local file
To import a local .skp or .trb file into Revit:
- Open your project in Revit.
- On the SketchUp ribbon, select SketchUp > Import > Local.
- Select a
.skpor.trbfile. - Review the object classifications in Select Objects To Import. See Selecting Objects to Import to Revit for the available options.
- Click Import. The importer applies your saved import settings and opens Importing TrimBIM File. See Trimble SketchUp Importer for Revit Settings.
- Track progress in Importing TrimBIM File:
- Importing Model <File Name> shows the name of the file being imported.
- Objects and Planes shows the size of the import.
- Now Processing shows each step as it runs.
- Step, Percent and Time show the current step, percentage complete and total elapsed time.
- To stop the import at any time, click Cancel .
Import from Trimble Connect
Start the import from the Trimble Connect panel, which is separate from the SketchUp Importer for Revit panel. To import a file saved in Trimble Connect:
- Open your project in Revit.
- On the Trimble Connect panel, select SketchUp > Import > Trimble Connect to open the Trimble Connect dialog.
- In Trimble Connect, find and double-click the file you want to import. The download dialog shows a progress bar, and Select Objects to Import opens.
- Review the object classifications in Select Objects To Import. See Selecting Objects to Import to Revit for the available options.
- Click Import. The importer applies your saved import settings and opens Importing TrimBIM File. See Trimble SketchUp Importer for Revit Settings for the available settings and how to change them.
- Track progress in Importing TrimBIM File:
- Importing Model <File Name> shows the name of the file being imported.
- Objects and Planes shows the size of the import.
- Now Processing shows each step as it runs.
- Step, Percent and Time show the current step, percentage complete and total elapsed time.
- To stop the import at any time, click Cancel .
Import from 3D Warehouse
Start the import from the Trimble Connect panel, which is separate from the SketchUp Importer for Revit panel. To import a model from 3D Warehouse:
- Open your project in Revit.
- On the Trimble Connect panel, select SketchUp > Import > 3D Warehouse to open the 3D Warehouse window.
- Search for the model you want to import.
- On the model's details page, click Download. The download dialog shows a progress bar, and Select Objects to Import opens.
- Review the object classifications in Select Objects To Import. See Selecting Objects to Import to Revit for the available options.
- Click Import. The importer applies your saved import settings and opens Importing TrimBIM File. See Trimble SketchUp Importer for Revit Settings for the available settings and how to change them.
- Track progress in Importing TrimBIM File:
- Importing Model <File Name> shows the name of the file being imported.
- Objects and Planes shows the size of the import.
- Now Processing shows each step as it runs.
- Step, Percent and Time show the current step, percentage complete and total elapsed time.
- To stop the import at any time, click Cancel .
- When conversion finishes, select where to place the object in your project.
Import results
A success or failure message may include notices about the import. For example, the importer may report that it used a different category for some objects or simplified some geometry.
When the import ends, Revit shows one of these messages:
Title | Message |
|---|---|
Import Completed | <file> imported successfully! (<time>) |
Import Cancelled | Elements imported before cancelling were kept. |
Import Failed | <file> could not be imported. |
Import Error | An error occurred during import. |
(none) | Open a Revit document before importing. |
(none) | Could not resolve import settings. |
(none) | No curtain wall types were found in this project. |
(none) | No levels were found in this project. |
If the import fails, match the reason shown in Revit to the next steps below:
Reason | Cause | Next Steps |
|---|---|---|
Revit could not modify the document (it was read-only or temporarily disabled during import)... | The project is read-only, or Revit is in edit mode. | Finish any active edits in Revit and check that the file is not read-only. Reopen the project and try the import again. |
An imported element name conflicts with existing content in the document. | The project already has a family or type with that name. | Rename the component in SketchUp and try the import again. |
Revit rejected part of the geometry during import. Check the log for details. | Revit could not accept some of the geometry. | Find the object that failed in the log. Adjust its geometry as needed. |
The file appears to be invalid or corrupted and could not be read. | The . | Save the file again, then retry the import. |
Template files are missing... | The installation is missing family templates. | Reinstall the extension. |
The import took too long and was stopped. | The import timed out. | Import fewer objects, or use Mesh for dense context geometry. |
The file could not be found. | The file has been moved or deleted. | Try the import again. |
The SketchUp conversion components are missing... | The converter files did not load. | Reinstall the extension. |
The geometry of these objects could not be built: 'A', 'B'... and N more. | Revit could not build the geometry for the listed objects. The message names up to five. | Find the objects in your SketchUp model and adjust them as needed. |
The category of these objects could not be assigned: ... | Revit rejected the assigned category. | Choose another category in Select Objects. |
If the importer shows a notice, use the table below to check what changed and what you can do about it:
Notice | Cause | What to do |
|---|---|---|
Some geometry was simplified due to boundary issues in the SketchUp model. | The importer removed faces that were not planar, crossed themselves or were too small. It also filled holes. | Clean up the affected objects in SketchUp, then import again. |
roof object(s) could not be built as editable Revit roofs and were imported as meshes in the Roofs category. | The roof did not pass a shape check. | Simplify the roof to one closed slab of even thickness. Remove duplicate faces and make sure the faces have a consistent orientation. See the Modeling Playbook. |
curtain wall(s) could not be built as native Revit curtain walls and were imported as generic objects instead. | The parts do not form a regular grid, or Revit stopped the process. | Use a regular grid, or draw the wall as surfaces and thin solids. See the Modeling Playbook. |
object(s) were imported as Generic Models because Revit does not allow for families. | The selected system category does not accept families. | Choose another category, or select Native or Mesh. |
For other errors and fixes, see Troubleshooting the SketchUp Importer for Revit.